PM-136

Tekniske data: Operating voltage: 12-45Vdc Idle current: approx. 25mA (enable "0") Current set: 0.5; 1,0; 1.5; 2.0; 2.5; 3.0; 3,5 and 4.0A Voltage loss: 1V when Im=1A Fuse: 4A self recovery. Aux. osc. freq: 200, 500, 1000, 2000 Hz 3000, 5000, 8000 Hz Ramp speed: 0,2...3s (0...8000 Hz) Aux. freq. precision: better than 0,5% Digital control: "on" when Uin 4 -30V "off" when Uin 0-1V Step freq. max: 15 kHz Operating temp: 0-50°C Dimensions: 87x73x35mm Weight approx: 90g   Datablad

PM-206

Tekniske data: Forsyningsspenning: 12 - 36 VDC Overspenningsvern: 39 VDC Strømbegrensning: 0-15 A Strømgrense med 0-5 V signal: 0-5 V ( 0-5 A ) Overopphetingsbeskyttelse: 120 °C Spenningstap: 0,8 V vid Im = 10 A Spenningsregulering: 0 - 10 V ( 0 - 5 V justerbart ) Potensiometerregulering: 2 - 10 k Spenningsreguleringsutgang: 5 V ( max 10 mA) Hallsensorutgang: 6,5 V Digital reglering: ”Høy” @ Uin = 3-30 V ”Lav” @ Uin = 0-1 V Reguleringsinngangsimpedans: 10 k Mål: 89 x 73 x 25 mm Vekt: ca 130 g 60° eller 120º kommutering ± 10V Styrsignal Justerbar/kontrollerbar strømgrense Høy effektivitet Hall sensorer Brems Datablad

PM-285

Tekniskedata: Forsyningsspenning: 10 - 35 VDC Overspenningsvern: 38 V Underspenningsvern: 10 V Startspenning: 11 V Strøm Uten belastning: 20 mA Strøm: 20 A kontinuerligt / 30 A max ( 10 s ) Strømbrudd: 5 W @ 20 A , 16 kHz 4 W @ 20 A , 2 kHz Strømgrense: 1 - 30 A PWM frekvens: 2 kHz eller 16 kHz Temperatur max: 90°C EMC-godkjenninger: EN 50081-2 & EN 50082-2 Vekt: 85 g Arbeidstemperatur: - 20-60°C Regulerbar strømgrense EMC testad Liten i størrelsen Panel montert til motorer 30 - 200 W Datablad

PM-318A

Tekniske data: Operating voltage: 12-35 VDC Idle current: n. 20mA Current settings: 0.1 -3A ( step 0.1A ) Auxiliary oscillator: 50-10000Hz Frequency accuracy: typ. 0.5% Ramp adjust: 0.1-5s ( 0 to 10000Hz ) Control level:  "on" when Uin 4 -30V "off" when Uin 0-1V or open Max. step freq: 15kHz Rs-485: half duplex 9600/19200 baud. Operating temp: 0-50°C Dimensions: 87x72.5x25mm Weight: 100g Datablad

PM-324-SAF

Tekniske data: Supply voltage 10-35V Shut down voltage 8V Power up voltage 9V Motor current cont. 4A at 2kHz / 3A at 16kHz mom. 6A ( TaCurrent limit 0.1-6A ( in start max. 8A ) Overtemp. limit 100°C PWM frequency 2kHz / 16kHz Analog feedback ranges 0-5V / 0-10V Control input ranges (position) 0-5,5V / 0-11V / 4-20mA Positioning potentiometer 10k recom. 22k max. Input resistor for mA-signal 250ohm (socket on board) Position out. signal range 0-5V or 0.5 - 4.5V, 0V for FAULT Digital input levels high =4-30V, low=0-1V Digital input impedances typ. 47kohm Limit-FW / -BW and pulse inputs imp. typ 10kohm COMBIPORT pin.13 - Fault output, NPN, open coll. max 30V / 50mA - Disable input Uin < 1V ( NPN ) - position output impedance 1kohm Connectors for motor and supply max. 1mm² cable Connectors for signals max. 1mm² cable Operating temp( Ta ) -40...60°C Dimensions 72x32x25mm Weight 80g CE-tested for household and EN-55022B, industrial environment (EMC) EN-61000-4-3, -4, -5, -6 passed Datablad

PM-356A-SBL

Tekniske data: Supply voltage 12-24V ( 11-35Vdc ) Overvoltage shut down 40V Idle current typ. 30mA Max current 15A cont. ( Tamb. 40 °C ) Max. current 20A cont. ( with fan, Tamb. 40 °C ) Max current peak 40A ( max 2s ) Max brake output current 10A Pwm frequency typ. 16kHz Overtemperature Temp shut down 90°C Current limit setting 1-40A ( step 1A ) Current limit analog scale 0-5V = 0-40A Logic level of digital inputs "off" = 0-1V or open / "on"= 4-30V Input impedance of logic inputs 10k Response time of digital input 2ms Analog input range 0-5V up to 0-10V Analog input resolution 10bit. ( 1024 step ) Position counter resolution 31b ( 2147 milj. steps ) Input impedance of analog inputs 100k Input filter of analog input 100Hz Fault outputs NPN max 50mA Fan output NPN max. 100mA EMC measured for industrial and env. PCB material flammability class UL94V-0 Dimensions 89x73x32mm ( height 44mm with fan ) Weight 150g and 200g with fan Datablad

PM-67

Tekniske data: Forsyningsspenning: 20 - 34 VDC Strøm Regulerbart: 3 A kontinuerligt/ 5 A Max Strøm obelastad: ca 40 mA Spenning justerbart:  0-5 V / 0-10 V Effekt: 70 W kontinuerligt Brems Effekt: 30 W Spenningsförlust: 1 V @ lm = 3 A Strømgrense: 0.2-5 A Sikring: 3 A Självåterställande Rampe: 0.5-10 s Potentiometer regulering: 1-10 kohm Signalspenning: PÅ @ Uin = 4-30 V AV @ Uin = 0-1 V eller åpen EMC-godkjenninger: EN 50081-2 & 50082-2 Mål: 65 x 72 x 30 mm Vekt: ca 70 g Strømgrense : 0.2-5A Vendbar Brems Kontinuerlig / 2 - trinnshastighetskontroll Justerbar akselerasjon/rampet brems Justerbar effektgrense Høy effektivitet Datablad

PM241C

Tekniske data: Forsyningsspenning: 10 - 35 VDC Startspenning: 9 V, pauser under 8 V Strøm: 15 A kontinuerligt, 30 A peak Strømgrense justerbar: 0,1 - 20 A Beskyttelse mot overopphetning: 100 °C Start/stopp rampe: 0 - 5 s PWM frekvens: 2 kHz Regleringhastighet (speed-2): 0 - 5 V = 0 - 100 % PWM Reglering: high = 4 - 30 V, low = 0 - 1 V Potentiometer reglering: 47 kohm Responstid ingång: 5 ms Felsignal utgående: max 30 V / 50 mA Temperaturområde: - 40-60 °C Mål: 42 x 72 x 25 mm Vekt: 75 g Hastighetskontroll Myk start/stopp Strømgrense Justering av digitale parametere Kompakt Datablad

XBD

Tekniske data: 20–75 W 230 V / 50 Hz mating Analog hastighetskontroll Start og stopp rampe  

XFD

Tekniske data: 30–100 W 24VDC Analog hastighetskontroll Start og stopp rampe    

XWD

Tekniske data: 10–90 W 230 V / 50 Hz mating Analog hastighetskontroll Start og stopp rampe